Tag: Tracy Arm

Posted on

Two Steps Forward…

I put the border on the abstract iceberg quilt. And then I put it up on the design wall, and I stared at it for a bit. And I went and did something else for a while, waited a couple of days, and then came back and stared at it a little while longer. I even took it with me quilt shop hopping this past weekend (the All New England Quilt Shop Hop is on!) and looked to see if I could find something that I liked better for the borders, but noooo. It just…didn’t work. I even disliked the extension of the water as the bottom border. 

People who make all of the decisions about a quilt – fabric, borders, backing, binding – all at once utterly fascinate me. I have a pretty good visual imagination. I can see pictures in my head, and they usually look reasonably like reality. I can see all of the fabrics of a quilt top together. Sometimes I’m off – I was once in the middle of making a pieced quilt top and put some of the pieces up on the design wall to see how it would look, and I realized something was off. I ended up changing just one of the fabrics, and it was like night and day. So much better with that one different fabric! But for the most part, I pick the fabrics and I can see what it will look like in the end. To also pick the borders and the backing and the binding at the same time? Rarely. I want to see the whole thing together before I try to imagine a frame for it (which is what the border is). The binding usually ends up being the same as the border or very close to it, so I can’t decide that yet. And my ADHD brain doesn’t deal with the backing (which is out-of-sight-out-of-mind) until I get to the point where I need to quilt it – then I realize I don’t have it yet. My process bites me in the butt occasionally, but it mostly works. 

I came back home after shop hopping, put the abstract iceberg quilt back on the wall, and stared at it again. And the longer I looked at it with the borders I’d chosen, the less I liked it still. So I spent tonight with a seam ripper and a halfway decent movie and took all of the borders off. Made a colossal mess, too, while I was at it. But I think I’m just going to quilt it without the borders and be done with it. I found a shimmery white that I was planning to use as the binding, and I think I’ll still use that, but the borders have been nixed entirely. And I’m actually really happy with that. It took me a while to get there, but that’s the process!

Also in front of a movie or two this weekend after I was done shop hopping, I finished up the Tracy Arm quilt. Here it is, in all of its finished glory!

Once I clean all of the cat fur off of it, go buy a couple of dowels to use to hang it with, and figure out where to hang it, I’ll do something with it! As of right now, I’m not sure where I should put it. (For reference, I still have several cross stitch projects – professionally framed, of course – and several other pieces of art that I haven’t hung up yet despite having lived here for a little over two years. This could take some time.)

Posted on

Chipping Away at All of the Projects

I’ve been here, there, and everywhere over the last week or so, but I’ve been chipping away at the abstract iceberg quilt. First there was making a list of all of the colors of fabric that I identified when I labeled the foundation papers, and then figuring out how many of each of those pieces I would need. That, in turn, helped me figure out how much of each of the new fabrics I needed to get. Most of the fabrics were small amounts – I just needed one or two pieces here or there, not huge amounts. Then I went to get the fabrics that I needed.

After washing all of the fabrics, I started cutting the other night. Fortunately, the pieces I need for this quilt can be divided into two kinds – the piece for items 1 and 2, which are the same size, and the piece for items 3 and 4, which are a different size than items 1 and 2 but the same as each other. Fortunately, the strips of fabric I needed to cut were all the same! I’m still in the process of cutting up all of the fabrics I need and hoping I don’t get burned by the fact that some of the fabrics can be used on right and wrong side (read: batiks), but other fabrics not so much. I’ll deal with it…some other day.

The Tracy Arm quilt has also been moving along. For those of you following along in the peanut gallery, I finished applique sewing the pieces onto the background. I did have to take out and resew some of the sewing with the monofilament, which took some effort because sometimes when I went to resew it, the same thing happened again. My seam ripper got a workout. But the sewing is done and it looks great!

I found the fabrics for the borders (one 1” border closest to the image, plus a 4” border outside of that) and sewed those on. I was able to use some stuff I had in my stash for the 1” border, which was nice, but I did need to go find the correct navy blue to make the 4” border. (I also found the backing for this quilt in my stash!) I put it all together, and I’m really pleased with the result. 

Unfortunately, while I was working on the border for the Horseshoe Canyon quilt (yeah, I bet you forgot about that one), my sewing machine decided it was DONE with this nonsense, so it’s at the sewing center getting looked at (as of today). It’s still under warranty, and it seems like it’ll be a relatively simple fix, but it was just something I could not solve despite my best efforts. So…in the meantime, I have been finishing up the cutting for the abstract iceberg quilt, which will take me a while. The plan is to get all of that cut out, then to clip all of the pieces to their respective foundation papers, which will probably take me another couple of evenings to get done.

The Tracy Arm quilt got pinned with its backing and batting today, so that’s just waiting on the sewing machine, and I have a traditional quilt I was working on before this whole project that still needs the final hand sewing on the binding to be finished. At a trip to a different local quilt shop this past weekend, I found some fabrics for a different quilt I’d like to start, which will involve the layering applique pieces again (so, no sewing!). I’ll talk about that one in my next blog post. 

I will not be hurting for things to do while I’m machine-less!

Posted on

Making More Decisions

My guild has a Wednesday night Zoom meeting each week, just to hang out and work on whatever project we’re working on. I decided that I’d see if I could get more done on the Tracy Arm iceberg quilt. I ended up going to the quilt store beforehand to find the border/binding fabric. I took the quilt with me to get the border fabric (as one does), and I noticed that some of the iron-on adhesive had come unstuck, so I decided that I would need to sew things down. While I was there, I got some monofilament thread to sew down the iceberg.

So I spent the Zoom call sewing the fabric pieces down. Because I am remarkably consistent in my choices of colors for things in general, I already had all of the regular thread I needed to be able to sew all of the pieces other than the iceberg. The colors weren’t exact for all of the fabrics/threads, but they were close enough that the difference simply adds dimension rather than blending in seamlessly. I actually really like the sewing – it brings out some things that hadn’t been clear before.

Sewing with the monofilament on the iceberg was a challenge. I used regular thread in the bobbin, which may have been a mistake. Some of the stitching was perfect – it did exactly what I wanted it to do, and it’s invisible unless you look up close. But then there were occasional sections where the tension decided to go wonky, so the bobbin thread shows on top. I’m not quite sure what happened there, but I may need to make a bobbin of the monofilament thread just to finish it up. I gave up before I got to that point. I pulled out and sewed over one particularly long stretch where the bobbin thread was on top, and the same thing happened the second time I sewed over it, so I threw in the towel because I was frustrated and it was getting late. But I’ll go back at it at some point soon.

The fabrics for the borders – both the green for the inner border that you see in the picture I posted in the last blog entry and the darker blue I got for the outer border – went into the laundry when I got home from the quilt store, so I’ll tackle the border some other day. I do wash all of my fabrics before I do anything with them. I work with reds occasionally, and I have screwed up a quilt because the red ran in the laundry (even after I washed it!), so I do try to get everything laundered before I use it. It doesn’t really make a difference what you do – you just have to be consistent at it. 

One more decision that I’m going to have to make: the quilt top is stiff in places because of the iron-on adhesive. But the iron-on adhesive is not all over the top of the quilt, so some places are just…fabric, while other places are layers of fabric with the iron-on adhesive. If I’m just going to hang the quilt on the wall, that’s not a big deal – no one will feel it regularly and realize that it’s different. But if I plan on doing something else with it, I might need to figure out how to make the feel of the entire top consistent. My inclination is that I’ll simply hang the quilt on the wall so it’s not a big deal, but I do have to make sure that decision is the right one before I sandwich the quilt.

Posted on

When the Weather is Bad…

…spend the day in the sewing room. However, I did not get done what I had planned.

I thought today would be the day I projected the abstract iceberg image up on the wall and figured out what fabrics would go in which spaces. I was completely wrong. Instead, I worked on the Tracy Arm quilt. In fact, I finished the image part of it, which was a bit of a surprise.

I used a modification of a technique that I learned in a class in April taught by Trudy, one of the members of my quilt guild. I don’t think it’s Trudy’s original technique – if I remember correctly, she learned it from someone else. But she has done a lot with it, mostly with landscape templates that she has made up. I made this piece in her class the day she taught it to us.

The technique involves cutting out what are essentially puzzle pieces and adhering them to a piece of muslin using an iron-on adhesive. The selection of fabrics is crucial, and there’s a method to it. I used the same technique on the unsuccessful Norway image in the Choosing Pictures, Part II blog entry. The technique is fairly simple – an image can easily be done in a few hours – but a lot of thinking goes into it. That’s the technique I wanted to use for the Tracy Arm iceberg quilt.

As you remember from the previous blog entry, I had most of the fabrics for this, but I wasn’t entirely sure that the sky fabric was the one I was going to use. Well, I used that sky fabric – it turns out that once I laid it out with all of the other fabrics, it was perfect.

All of the fabrics with Post-Its are part of the Tracy Arm quilt

The plan was to recreate the entire image except for that awesomely fabulous iceberg right in the middle. I had the image printed onto fabric, and I planned to use that as a template – much like Trudy’s templates – get the fabric pieces to be the right size. I also planned to cut the iceberg out of the original image and basically paste it as the focal point – rightly so – of the recreated image. 

The challenge for this particular image was that it was much larger than a sheet of tracing paper, which is necessary to get the mirror image pieces you need of both the fabric and the adhesive. Rather than attempting to draw the full image out on one sheet of paper, I ended up tracing individual pieces of the image onto paper. Fortunately, I only needed to extend the paper for one piece, and I had some smaller pieces I’d cut off of the foundation papers for the abstract iceberg quilt yesterday.

One of these days, I’ll learn that I need to go back and look at the instructions for a technique like this if I haven’t done it in a while. I completely forgot about the whole mirror image part of creating the templates, so I had to redo some stuff about halfway through. But most of the fabrics were batiks, which are thankfully reversible, so I was able to get away with screwing up…this time.

I also didn’t have a piece of muslin that was big enough to act as a foundation for all of the pieces, so I improvised. I ended up using the sky piece and the water piece as foundations for some of the pieces, so I simply had to find a foundation for the middle 3.25” of the image. The printed image had about 8” of white border around it, and once I cut it off, I was able to use one of those pieces as the foundation for the middle of the image. It took math. I am not good at math. But somehow it worked. 

Since I was using a piece of the original image in the recreated image, the scale of the recreated image had to match the original as closely as possible. Where I and my ADHD might have just fudged it for an image that was entirely a recreation, I really didn’t want to get to the end and find out that the iceberg was bigger or smaller than the space that it needed to go in. So I measured, and I marked things with chalk to show where they should go. And the iceberg fit PERFECTLY in the end. I was rather proud of myself, honestly. I was so scared of getting to the end and discovering I screwed up somehow that I really took my time to get it right.

I’m really pleased with how it came out. The iceberg is, as it should be, the absolute centerpiece of this quilt.

There are still some decisions that need to be made. In the original image, there is snow on some of the mountains in the background, which I pretty much ignored when I was choosing fabrics figuring that I could add it later if I felt I needed to. I haven’t decided yet whether or not to do so, and if I did add it in, how I would do it. (More fabric? Thread painting? Paint? Something else?) I also have not yet decided whether or not I want to sew down the applique in some way. I feel like I probably should, but I am not sure how to deal with the iceberg, which has little fiddly bits I had to cut out that would be lost if sewed over them. So. many. decisions.

Posted on

What’s the Process?

When I was going through the process of building the Horseshoe Canyon quilt, I wasn’t quite sure what form this blog would take. So I documented a few things, but not nearly enough to walk anyone through the process of doing it for themselves. Now that I’ve got one quilt under my belt (mostly anyway), I’m going to start working on several new ones. As I work on them, I’ll document the steps I take so that someone else might be able to follow in my footsteps someday. So…what’s next?

I have three images I’m working on. Let me go through them one by one.

The first image I’m working on is a picture I took in the Lofoten Islands in Norway in the fall of 2023. This is the classic Reine (Hamnøy, really) rorbuer shot that every photographer wants to get. I got it home, and I removed all of the color in it except for the red of the fishermen’s cottages, which is classic Lofoten style. Then, I had it printed out on fabric. The idea, once I gather the gumption to tackle it, is that I will replace some of the color from the original image using thread. I’ve never done this before. I’m a little scared. This will take me a while to begin – I guarantee it.

This image is also printed out on fabric. I took this on a recent cruise in Alaska – Tracy Arm, in Tongass National Forest, to be specific. The icebergs in Tracy Arm, which come off of the South Sawyer Glacier, are sometimes this lovely shade of green-blue that I found rather impossible to resist as a photographer. I had the whole photograph printed out on fabric, but in reality I’m just going to use the iceberg part of the image. The rest of it I will recreate using regular fabrics I can find in the quilt store. This one I am really, truly excited about.

This is another one I’m excited about. This picture was taken by Oscar Farrera, the official ship photographer on the Alaska cruise I went on. I saw this picture on a screen on the ship and asked Oscar if I could use it as the inspiration for a quilt, and he agreed (although I’m pretty sure he thinks I’m nuts). This one is going to be more abstract – there’s no way I could do a faithful rendition of this using fabrics from the quilt store, so while I will indeed be using other fabrics, the idea is that I’ll use the colors and the shapes in the original image to inspire the end result. Unlike the Horseshoe Canyon quilt, though, I do not (yet?) have a pattern I’ll be following. In fact, I’m still not 100% sure how I plan to do any of this, but there’s nothing like figuring it out as I go along!

At this point, you – like Oscar – may be questioning my sanity. “Three pictures?” you ask. “Why three?” Excellent question. There are several reasons. 

  1. It’s going to take me some time to figure out the thread painting bit of the Lofoten quilt, so in the short term, I’ll really only be working on two quilts. But I do suspect I will start work on the Lofoten quilt before I finish at least one of the other two.
  2. It’s also going to take me a few weeks to find a critical mass of fabrics for the abstract iceberg quilt. I have several fabric stores I want to visit, and while a couple of them are in the area, a couple aren’t, and they are, unfortunately, in totally opposite directions from my house. In addition, most of the stores are open during my working hours on weekdays, so I have to go on weekends. It’ll probably take me a month or so to get to all of them. While I’m gathering fabrics, I’ll probably attempt to work out what exactly I’ll do to them once I find them, so there will be some planning behind the scenes that may or may not be documented.
  3. ADHD. I get bored easily. I found that while I was working on the Horseshoe Canyon quilt, I needed a distraction from it because I was really sick of sewing all of those orange strips together. Fortunately, I took a three-week break from working on that quilt right in the middle because I went on vacation, so I was able to take the time I needed and come back to it excited to work on it and, most of all, get it done. I do not have any vacations planned anytime soon, so I’m going to plan now to work on several things so I don’t get bored or frustrated and attempt to walk away from any of these projects permanently. When I’ve had enough of working on this one, I can work on this other one.

So, for those reasons, I’ve got three projects moving along at a slow but steady pace.